Sale!

ASSEMBLY CLUTCH BAJAJ PULSER 150

Original price was: ₹1,690.00.Current price is: ₹1,375.00.

Restore full engine torque transfer, smooth shifting, and effortless acceleration with the authentic ASSEMBLY CLUTCH BAJAJ PULSER 150. Precision-manufactured to OEM specifications, this heavy-duty clutch component delivers dependable grip and high thermal stability.

  • Zero Slippage: Premium friction lining compound ensures instant power transfer without loss of engine RPM.
  • OEM Direct Bolt-On: Tailored for Bajaj models without modification to clutch hub or basket.
  • Long-Life Durability: Thermal-resistant friction material withstands intense city stop-and-go commuting.

In Stock

Estimated delivery date: November 24, 2026 – November 26, 2026
- +

The Assembly Clutch Bajaj Pulser 150 delivers instant throttle response, smooth power transmission, and flawless gear shifting for your motorcycle or scooter. Manufactured to stringent OEM dimensional and metallurgical standards, this heavy-duty clutch assembly replaces worn, slipping, or warped factory clutch units, restoring complete torque transfer from engine crankshaft to gearbox without power loss or overheating.

Workshop Guide & Diagnostic Standards for Assembly Clutch Bajaj Pulser 150

Upgrading your vehicle with this factory-balanced Clutch Assembly restores proper lever free-play, prevents premature engine oil contamination from friction debris, and guarantees progressive power modulation across daily stop-and-go commuting and demanding highway cruising.

1. High-Tensile Die-Cast Aluminum Clutch Hub & Pressure Plate Architecture

Precision cast from high-silicon ADC12 grade aluminum alloy, the clutch center hub and pressure plate undergo high-temperature artificial aging (T6 heat treatment). This achieves exceptional hardness and wear resistance, completely eliminating notching and grooving on hub splines where friction plate drive teeth engage. The flat, diamond-turned contact surfaces ensure uniform contact pressure without hot-spot warping.

2. Heavy-Duty Multi-Plate Wet Clutch Friction Metallurgy & Kevlar Linings

The clutch friction plates are constructed from cold-rolled carbon steel cores bonded with advanced non-asbestos organic, Kevlar, and cellulose composite friction compounds. Calibrated radial grooves facilitate continuous 4-stroke engine oil circulation through the friction interface, sweeping away microscopic wear particles and preventing thermal friction glazing under heavy engine loads.

3. Calibrated Helical Coil Springs & Clamping Force Dynamics

Equipped with shot-peened silicon-chrome alloy steel compression springs, the assembly delivers consistent, fade-free clamping pressure. Balanced spring rates prevent clutch slippage during peak engine torque delivery while maintaining a light, fatigue-free clutch lever feel during prolonged city traffic riding.

4. Splined Primary Drive Gear & Transmission Input Shaft Tolerances

The central hub internal splines are CNC-broached to exact micron tolerances to mesh perfectly with your motorcycle’s gearbox main shaft. This snug fit eliminates rotational backlash and drivetrain clunk during rapid gear transitions, protecting transmission gears from shock load damage.

5. Oil Bath Lubrication, Thermal Heat Dissipation & Anti-Slip Properties

Designed for full immersion in 4-stroke motorcycle engine oil (JASO MA/MA2 compliant), the assembly incorporates thermal relief slots and spiral oil channels. Even during prolonged clutch feathering on steep hill starts or heavily loaded rides, the assembly maintains stable operating temperatures between 85°C and 110°C without slipping or lever fade.

6. Smooth Clutch Lever Modulation, Free Play & Cable Adjustment

The clutch release lifter mechanism features a case-hardened pushrod thrust bearing surface that minimizes rotational friction against the clutch pressure plate. This ensures silky smooth lever modulation, predictable bite-point engagement, and crisp neutral gear finding without annoying gearbox drag or false neutrals.

7. Workshop Installation Protocols, Pre-Soaking & Torque Guidelines

Professional installation requires soaking new friction plates in fresh 4-stroke engine oil for a minimum of 15 to 20 minutes before assembly to prevent dry-friction burn. Torque the clutch hub castle nut with a proper clutch holder tool, cross-tighten pressure plate spring bolts in a diagonal pattern to factory torque specifications (typically 8 to 12 Nm), and adjust clutch cable free-play to 10-15 mm at the lever tip.

Technical Specifications

Specification ParameterEngineering Standard
Center Hub MetallurgyHigh-Tensile Die-Cast ADC12 Aluminum Alloy (T6 Heat-Treated)
Friction Plate LiningNon-Asbestos Kevlar-Cellulose Composite with Radial Oil Channels
Drive Plate MaterialCold-Rolled Carbon Steel with Anti-Warp Punching Flatness
Spring ArchitectureShot-Peened Silicon-Chrome Helical Compression Springs
Lubrication ComplianceJASO MA / JASO MA2 Wet Clutch Motorcycle Engine Oil Safe
Operating TemperatureThermal Stability Tested from -10°C to +145°C

Comprehensive Two-Wheeler Buyer Guide & Diagnostic Checklist

  • Clutch Slipping Under Hard Throttle: When engine RPM spikes but the bike fails to accelerate proportionally in higher gears, the friction plates are worn down to their steel backing cores or the pressure springs have lost tension.
  • Clutch Drag or Creeping at Red Lights: If the motorcycle creeps forward or is impossible to shift into neutral when stopped with the lever fully pulled, the clutch steel plates are warped or the center hub is notched.
  • Chatter or Judder on Takeoff: Uneven spring tension or glazed friction surfaces cause violent judder during gradual clutch release from a standstill.
  • Burned Engine Oil Smell: Slipping clutch plates generate extreme frictional heat, burning the engine oil and leaving black soot deposits throughout the crankcase.

Frequently Asked Questions: Assembly Clutch Bajaj Pulser 150

Q1: Does this clutch assembly come pre-assembled?

Yes. This complete clutch assembly includes the center hub, pressure plate, clutch springs, steel drive plates, and friction plates pre-aligned for direct drop-in installation.

Q2: Do I need to soak the friction plates in oil before installation?

Yes. Even with complete pre-assembled units, mechanics should pre-lube or soak the plates in clean 4-stroke motorcycle engine oil for 15-20 minutes before securing the clutch cover to prevent initial dry friction wear.

Q3: Will this clutch kit fit both kick-start and self-start models?

Yes, provided your motorcycle model and year match the listing title. The primary gear and main shaft spline dimensions are identical across both starting configurations.

Q4: Do you deliver this product across India with free shipping?

Yes. Free shipping across India.

Technical Specifications & Vehicle Fitment

  • Part / OEM Code: b064e04a6325
  • Compatible Two-Wheelers: CLUTCH ASSEMBLY
  • Brand / Specification: Autoss OEM Replacement
Fitment & Shipping FAQs

Q: Which bike models fit ASSEMBLY CLUTCH BAJAJ PULSER 150 (b064e04a6325)?
This ASSEMBLY CLUTCH BAJAJ PULSER 150 (Part/OEM Reference: b064e04a6325) is designed for compatible fitment with CLUTCH ASSEMBLY. Please verify the mounting points and connector profile in the product photos before ordering.

Q: What is the catalog part number and brand for ASSEMBLY CLUTCH BAJAJ PULSER 150?
The catalog reference code / MPN is b064e04a6325 under Autoss OEM Replacement, supplied by Autoss.in (Elegant Innovations).

Q: What are the shipping timelines across India on Autoss.in?
All spare parts on Autoss.in are carefully packed and shipped pan-India through tracked courier partners including Delhivery, Xpressbees, and iCarry.


Reviews

There are no reviews yet.

Be the first to review “ASSEMBLY CLUTCH BAJAJ PULSER 150”

Your email address will not be published. Required fields are marked *

At-a-Glance Quick Fitment & Specs

Part Category CLUTCH ASSEMBLY
Compatible Bike Model Bajaj Pulser 150
Fitment Type Direct Replacement
Shipping Pan-India COD Available

Frequently Asked Questions — ASSEMBLY CLUTCH BAJAJ PULSER 150

Read the full buying guide →

Is the ASSEMBLY CLUTCH BAJAJ PULSER 150 compatible with all variants of Bajaj Pulser 150?

Yes, this CLUTCH ASSEMBLY is precision-engineered specifically for the Bajaj Pulser 150. It fits standard variants seamlessly, restoring smooth gear shifts and optimal power transmission. Ensure your motorcycle's clutch bell and friction plates match OEM specifications before final fitment by a mechanic.

What is the price of ASSEMBLY CLUTCH BAJAJ PULSER 150 on autoss.in?

The ASSEMBLY CLUTCH BAJAJ PULSER 150 is currently available on autoss.in for ₹1,375.00. This complete CLUTCH ASSEMBLY kit offers OEM-grade durability, eliminating clutch slippage and engine overheating issues. It delivers genuine quality and long service life at a competitive rate for your Bajaj Pulser 150.

When should I replace the CLUTCH ASSEMBLY in my Bajaj Pulser 150?

You should replace it with the ASSEMBLY CLUTCH BAJAJ PULSER 150 if you experience hard gear shifting, loss of acceleration despite high RPMs, clutch slippage, or unusual rattling noises. Installing this fresh unit revives optimal torque delivery and fuel efficiency for your daily riding.

Shopping Cart
Scroll to Top
How may I help you?
Powered by Autoss.inSupport
Rajeev 8851245687 RajeevChat on WhatsApp

Our Sales team is just a message away