Side panels are among the most frequently replaced cosmetic parts on Indian motorcycles – a fall, a cracked clip, or a faded panel is all it takes. But Hero Glamour side panel is not specific enough: the panel differs by type (Type 1, Type 2, Type 7) and colour. This guide shows you how to identify and order correctly.
1. Identify your bike panel type
Manufacturers release several cosmetic types of the same model, each with slightly different panel shapes and mounting clips. A Hero Glamour Type 1 panel will not fit a Type 2 or Type 7 bike. The type is usually visible on the old panel or in the bike variant details.
2. Match the colour
Side panels are sold in specific factory colours – silver, sports red, black-red, forest blue, and so on. A close-enough shade rarely looks right against faded or UV-exposed bodywork. If your bike is faded, buy both sides at once so the shade stays consistent.
3. Left, right, or a set
Panels are handed: the left and right differ. Some listings are a single side, others a pair. Decide whether you are replacing one damaged panel or refreshing both.
4. Clips, grommets, and screws
Panels mount with clips and rubber grommets that perish over time. Buy fresh grommets if the old ones are brittle, and re-use the original screws where possible. A panel that pops off is usually a worn clip, not a wrong panel.
5. Material and finish
Replacement panels are usually moulded ABS or fibre, supplied painted or primed. Ensure the finish matches (matte vs gloss) if you are replacing only one side.
6. Fitting tips
Start the clips by hand, do not force them, and tighten screws gradually in a cross pattern. Check panel gaps against the tank and seat before final tightening.
Bottom line
Get the type, the colour, and the correct side. Those three details decide whether a side panel looks factory or obviously mismatched.
Bike Model Fitment
| Bike Model | Year | Fits |
|---|---|---|
| Hero Glamour Type 1 | 2000-present | Yes |
| Hero Glamour Type 2 | 2000-present | Yes |
| Hero Glamour Type 7 | 2000-present | Yes |
| Hero Splendor Plus / Super Splendor | 2000-present | Yes |
| Hero Passion Plus / CD 100 Deluxe | 2000-present | Yes |
Quick Mechanic Diagnostic Checklist
- Identify the panel type (Type 1, Type 2, Type 7, etc.)
- Match the factory colour exactly
- Confirm left, right, or a pair
- Check the clips and grommets
- Confirm the finish (matte vs gloss)
- Buy both sides together if the bodywork is faded
- Start clips by hand and tighten screws gradually
Frequently Asked Questions
How do I find my bike side panel type?
The type (Type 1, Type 2, Type 7) is usually printed on the back of the original panel or listed in your bike variant details. If unsure, send us a photo of the old panel and its mounting clips.
Are side panels sold as a single piece or a pair?
It depends on the listing. Some are a single side (left or right), others a pair. Check the product title - it states whether you get one panel or both.
Will a Hero Glamour Type 1 panel fit a Type 2 bike?
No. Each type has different panel shapes and mounting points. You must match the exact type.
How do I match the colour to my faded bike?
A factory colour will look brighter than a UV-faded panel. If your bike bodywork has faded, buy both sides together so the shade stays consistent.
Why does my side panel keep coming loose?
Usually worn clips or grommets rather than the panel itself. Replace the clips and rubber grommets and the panel will sit tight again.