Royal Enfield Petrol Tank for Classic 350 BS3 Red
Looking for an authentic replacement Royal Enfield Petrol Tank for Classic 350 BS3 Red? Featuring the original 13.5 litres fuel tank capacity, this heavy-duty replacement fuel tank is crafted from deep-drawn Cold Rolled Coil (CRC) sheet steel, engineered specifically for the Royal Enfield Classic 350 BS3 (Carburettor UCE Twinspark platform). Built strictly to original factory blueprints, it delivers an exact bolt-on fit to your motorcycle frame without requiring custom brackets, welding, or chassis alterations.
Whether you are replacing an original tank plagued by internal rust flake contamination, dented side panels from road debris, or seam weeping around the fuel bung, this tank restores showroom fresh styling and reliable fuel delivery. The deep red finish is sealed under multiple coats of automotive-grade polyurethane clear lacquer, providing long-term protection against UV sunlight, rain showers, and petrol drips during fill-ups.
Exploring other colours or motorcycle generations? Browse our complete selection of Royal Enfield Petrol Tanks.
Compatibility
- Model: Royal Enfield Classic 350 BS3 (Carburettor UCE Twinspark platform)
- Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
- Engine Type: 346cc Single Cylinder UCE Air-Cooled Carburettor Engine
- Does NOT fit: Classic 350 BS6 EFI (2020 onwards with internal electric fuel pump)
- Does NOT fit: Classic 350 Reborn (2021 onwards with J-series dual cradle chassis)
- Does NOT fit: Thunderbird 350/500, Hunter 350, Meteor 350, or Himalayan
Specifications
| Fuel Tank Capacity | 13.5 litres (OEM Specification) |
| Material | Deep-drawn cold-rolled coil CRC steel sheet |
| Dry Weight | Approx. 5.5 kg without fuel |
| Paint Finish | Red with UV-protective clear coat |
| Mounting Interface | Direct OEM factory bolt-on pattern for motorcycle frame |
| Fuel Bung & Emission | Factory threaded bung for standard BS3 gravity petcock valve |
| Condition | 100% Brand new aftermarket replacement |
What’s Included
- 1x Royal Enfield Classic 350 BS3 Petrol Tank in Red
- Fuel filler cap – NOT included (reuse your stock chrome twist cap)
- Fuel tap / petcock – NOT included (transfer your existing gravity petcock)
- Tank side badges / emblems – NOT included (transfer your OEM badges or knee pads)
- Chassis bolts and rubber mount pucks – NOT included (reuse your factory hardware)
Installation & Maintenance Tips
To ensure maximum lifespan from your new fuel tank, follow these straightforward workshop best practices before hitting the road:
- Pre-Installation Flush: Always rinse the interior of the new tank with half a litre of fresh petrol before bolting it down. This clears any transit packaging dust and ensures clean fuel flows to your fuel filter or carburettor jets.
- Rubber Dampers: Inspect your front frame rubber pucks and rear mount isolators. If your motorcycle has high mileage, replacing hardened rubbers prevents engine vibration transfer to the fuel tank seams.
- Seals & Gaskets: When transferring your fuel tap or pump module, install a fresh fuel-resistant Viton washer or O-ring and apply a thread sealant paste to guarantee a drip-free union.
- Paint Care: After mounting, treat the red paint with a coat of high-grade carnauba paste wax or ceramic detailer to create a protective barrier against road grime and petrol staining.
Frequently Asked Questions
What is the fuel tank capacity of this Classic 350 petrol tank in litres?
This tank has a total fuel tank capacity of 13.5 litres (including approximately 2.5 litres reserve capacity), engineered strictly to genuine Royal Enfield factory dimensions.
Will this tank fit other Royal Enfield models?
No. Fuel tank mountings and dimensions vary significantly between Royal Enfield generations. Please check the Compatibility section above to ensure exact model match for your motorcycle.
Does this tank come with the cap, tap, and badges?
No. This is the steel tank body only. You simply transfer your original fuel cap, fuel tap / pump module, and tank badges from your existing tank.
What colour options are available?
This listing is for the Red finish. We also stock other factory-matched shades in our Royal Enfield category.
Is the paint quality durable against petrol spills?
Yes. The tank is finished with automotive polyurethane enamel and a resilient clear coat. For best longevity, wipe away fuel drips immediately during fill-ups.
Do you offer free shipping?
Yes. Free shipping across India.
Shipping
Free shipping across India. Dispatch in 2-3 business days, delivery in 5-7 business days. The tank is packed in a heavy double-box with foam padding to prevent damage during transit.
Technical Specifications & Vehicle Fitment
- Part / OEM Code: AUTOSS-27954
- Compatible Two-Wheelers: Classic 350
- Brand / Specification: Autoss OEM Replacement
Fitment & Shipping FAQs
Q: Which bike models fit ROYAL ENFIELD Petrol Tank for Classic 350 BS3 RED (AUTOSS-27954)?
This ROYAL ENFIELD Petrol Tank for Classic 350 BS3 RED (Part/OEM Reference: AUTOSS-27954) is designed for compatible fitment with Classic 350. Please verify the mounting points and connector profile in the product photos before ordering.
Q: What is the catalog part number and brand for ROYAL ENFIELD Petrol Tank for Classic 350 BS3 RED?
The catalog reference code / MPN is AUTOSS-27954 under Autoss OEM Replacement, supplied by Autoss.in (Elegant Innovations).
Q: What are the shipping timelines across India on Autoss.in?
All spare parts on Autoss.in are carefully packed and shipped pan-India through tracked courier partners including Delhivery, Xpressbees, and iCarry.
Reviews
There are no reviews yet.